To start and stop a car smoothly, move the pedals gradually, check your surroundings before moving off and begin braking early. In a manual car, coordinate the clutch and accelerator to move off, then brake before pressing the clutch as you slow to a stop. In an automatic, use the brake and accelerator to control your speed.
What to check before starting your car
Practise with a qualified driving instructor in a suitable training area before trying these steps in traffic. Adjust your seat so you can press each pedal fully without stretching, while keeping a slight bend in your knees. Adjust your mirrors, fasten your seat belt and check that your passengers have fastened theirs.
Identify the pedals before starting. A manual has the clutch on the left, brake in the middle and accelerator on the right. Use your left foot only for the clutch and your right foot for both the brake and accelerator.
Keep the parking brake applied. In a manual, select neutral and press the clutch fully before starting the engine. In an automatic, select P and press the brake. Follow the vehicle handbook if it gives a different starting procedure, and don't move off if a warning indicates a fault that needs attention.
How to move off smoothly in a manual car
The clutch biting point is the pedal position at which the clutch begins transferring engine power to the wheels. You'll usually notice a slight change in engine sound and feel the car begin to pull. This position varies between cars, so ask your instructor to help you recognise it.
- Press the clutch fully down and select first gear, keeping the parking brake applied.
- Check your mirrors and blind spots, look in the direction you intend to travel, and signal if it will help other road users.
- Press the accelerator a little and slowly raise the clutch towards the biting point. Avoid making the engine race.
- When the road is clear and you feel the car begin to pull, release the parking brake. Pause briefly around the biting point as the car starts moving.
- Continue releasing the clutch gradually and gently press the accelerator further. Once you've fully released the clutch pedal, move your left foot to the footrest.
Don't aim for a fixed engine speed in every car. How much accelerator you need depends on the engine, slope and load. The Highway Code advises you to check mirrors and blind spots before moving off. Make these checks every time you practise.
How to stop a manual car smoothly
Look well ahead so you can ease off the accelerator and slow down gradually rather than brake at the last moment. Check your mirrors before a planned stop, choose a safe place to stop and signal where necessary.
Brake before pressing the clutch during a normal stop from driving speed. Apply the brake gently, increase the pressure as needed, then press the clutch fully before the engine starts struggling or stalls. At crawling speed, you may need to press the clutch almost immediately.
Just before you come to a complete stop, ease the brake pressure slightly to reduce the final jolt. Keep enough pressure to stop where you intend, then hold the brake so you don't creep or roll. The Highway Code recommends braking early and lightly in normal circumstances, then easing the pressure just before stopping.
For a longer wait, apply the parking brake and select neutral rather than holding the clutch at its biting point. When parking, secure the car before switching off, then leave it in the gear or position your handbook recommends for the slope.
Follow these steps for a planned stop. If you face an immediate risk of collision, prioritise stopping safely rather than avoiding a jolt. Practise emergency braking separately with your instructor.
How to start and stop an automatic car
Use your right foot only for the brake and accelerator during normal driving. Keep the brake pressed, start the engine in P and select D to move forwards or R to reverse. Check your surroundings, release the parking brake and gradually ease off the footbrake.
Many automatics creep when you release the brake, but some need you to press the accelerator or respond differently with auto-hold switched on. Learn how your car responds before pressing the accelerator. Once you've checked that your path is clear, press it gently.
To stop, release the accelerator and gradually press the brake, easing the pressure slightly just before you stop completely. Keep the brake pressed while stationary unless you're sure auto-hold has engaged. When parking, keep the footbrake pressed, apply the parking brake, select P and switch off, following the sequence in your handbook.
How to do a hill start
To move off uphill in a manual car, use the parking brake to prevent rolling backwards while you select first gear, press the accelerator a little and find the biting point. Release the parking brake only when you feel enough pull to move forwards, then gradually release the clutch.
Don't hold the car on the clutch while waiting on a slope. You'll make the clutch slip unnecessarily and generate heat. If you roll backwards, brake, secure the car and start the procedure again rather than rushing your pedal movements.
In an automatic, don't rely on creep to stop you rolling backwards uphill. Use the brake, parking brake or the manufacturer's hill-start system. Ask your instructor to show you how any hold function releases before relying on it.
Why does your car stall or jerk?
- Stalling when moving off: You may be releasing the clutch too quickly, not pressing the accelerator enough or selecting the wrong gear. Secure the car, select neutral, restart the engine and check your surroundings again.
- Jerking as you accelerate: Release the clutch more gradually and avoid sudden accelerator movements. Don't keep slipping the clutch once you're moving normally.
- Shuddering just before stopping: Press the clutch fully before the engine speed drops too low for the gear you've selected.
- A jolt as you stop: Ease the brake pressure slightly just before you stop completely, without releasing it enough to roll.
- Persistent judder despite correct technique: Ask your instructor to assess how you use the pedals. If the problem continues, have a qualified mechanic inspect the car.