Home

How Do You Park in a Perpendicular Parking Space?

To park in a perpendicular parking space, approach slowly, leave enough room to turn, check around you and steer into the bay. Straighten the wheels as your car lines up between the markings, then stop with the whole car inside the space. You can drive in forwards or reverse in. With perpendicular parking, you park at roughly 90 degrees to the aisle.

How to choose a parking space

Pick a bay wide and long enough for your car, with room to open the doors without touching another vehicle. Check for pillars, shopping trolleys, low barriers, wheel stops and vehicles sticking out into the aisle. A bay that looks empty may contain an obstacle you can't see over the bonnet.

Check how much room you have outside the bay too. A narrow aisle makes the turn harder, particularly in a long car. For your first attempts, choose a quiet practice area with clearly marked bays and practise under a qualified driving instructor's supervision.

Follow directional arrows and parking signs. Reversing into a bay often gives you a clearer view when you leave, but some spaces require you to park facing a particular direction. Choose another bay if you don't have enough turning room or can't see clearly enough to park safely.

Where to position your car before turning

Slow to walking pace before you reach the space and signal towards it well in advance. Check your mirrors and blind spots, then stop if pedestrians, cyclists or another vehicle approach. Your indicator shows what you intend to do; it doesn't give you priority.

Keep your car parallel to the row of bays as you approach. Leave enough space alongside the row to turn into the bay without clipping the nearest parked vehicle. There's no universal turning point: where you need to start turning depends on your car's wheelbase, turning circle, your seating position and the aisle width.

Ask your instructor to help you find reference points in your training car. A bay marking that lines up with your shoulder in one car may need to line up elsewhere in another. Use reference points to help you judge when to turn, but keep checking your surroundings.

How to drive forwards into a parking bay

  1. Approach with enough space between your car and the row of bays to make the turn, without moving into the path of approaching traffic.
  2. Check the bay and the area around your car again. Begin turning towards the space when the front of your car can safely clear the nearer corner.
  3. Move at walking pace and turn the steering wheel gradually. Check the gap beside the front corner entering the bay and along the opposite side of your car.
  4. As your car lines up with the bay, straighten the steering. Use the bay lines and your mirrors to check that your car is straight.
  5. Move straight ahead until your car is fully inside the space, stopping before any wall, kerb, wheel stop or parked vehicle.

If you turn too early, you may cut across the nearer corner. Turn too late and you may approach the far line at an awkward angle. Stop if you're unsure of the gap, rather than trying to complete the turn in one movement.

In a manual car, use the clutch and brake to keep your speed low, following your instructor's guidance. In an automatic, control your speed gently with the brake if your car has a creep function. Don't accelerate unnecessarily to complete a tight turn.

How to reverse into a perpendicular parking space

Drive slowly past your chosen bay and stop where you have enough room to reverse into it. You can start parallel to the row or at an angle if the aisle, markings and traffic allow it. How far you need to drive past the bay depends on your car, so don't use a fixed number of bays as a rule.

  1. Check all around before selecting reverse, including both blind spots and the area behind your car.
  2. Reverse slowly and steer towards the bay. Steer left to move the rear to the left, or right to move it to the right.
  3. Keep looking around directly and checking both mirrors. Watch the rear corners and the front of your car, which swings out in the opposite direction.
  4. When your car is parallel to the bay lines, straighten the steering and continue slowly backwards.
  5. Stop with enough space behind you and the whole car inside the bay.

Don't rely only on cameras or parking sensors. They can help, but they may not show every person or obstacle. The Highway Code advises you to check all around before reversing, reverse slowly and watch for the front of your vehicle swinging out.

How to straighten your car in a parking bay

If your car is at an angle, too close to a line or likely to touch something, stop. Check all around, then move out far enough to give yourself room to try again. Adjust your steering slightly and re-enter slowly rather than repeatedly turning the wheel while stationary.

Use both bay lines to judge whether your car is straight and centred. Leave enough space on both sides, rather than just enough room to open your own door. Don't copy the angle of a badly parked car beside you.

If you can't see how much space you have left, stop and check safely. Select neutral or Park as appropriate and apply the parking brake before getting out. Choose another space if you can't finish parking without risking contact.

How to leave a parking bay safely

Before switching off, check that no part of your car sticks out into the aisle. Apply the parking brake and select Park in an automatic. In a manual, follow your vehicle handbook's guidance on leaving the car in gear. Check for people and vehicles passing before you open your door.

When you're ready to leave, check around again and move slowly. If you need to reverse out, give way to people and traffic in the aisle. Look around directly as well as checking your mirrors. Stop if parked vehicles block your view or anyone enters your path, and continue only when you can confirm it's safe.

Sources