Home

How Do You Make a Safe U-Turn While Driving?

To make a safe U-turn, choose a permitted location with clear visibility, check traffic in every direction and turn only when you have enough space and time to finish without making anyone brake or swerve. Signal right, position your car correctly, turn slowly with controlled steering and enter the appropriate lane without cutting across other vehicles.

Where can you make a safe U-turn?

Look for a designated turning point or another location where signs, road markings and traffic rules allow you to turn. A gap in a divider does not, by itself, mean you can make a U-turn. Don't cross a continuous line or use an opening reserved for emergency or authorised vehicles.

Choose a place where you can see approaching vehicles well before they reach you. Avoid bends, the crest of a slope, narrow stretches and places where parked vehicles block your view. Also avoid turning near pedestrian crossings and busy entrances, where people or vehicles may cross your path even if you have plenty of turning space.

Check that the road is wide enough for your car's turning circle, which is the space it needs to turn fully. Allow enough room for the front of your car to swing around and for the rear wheels to clear the divider or kerb. If you'd need to mount the pavement or reverse into moving traffic, choose another location.

How should you position your car for a U-turn?

Check your interior mirror and right mirror before slowing down. Signal right early enough for drivers behind you to understand what you intend to do, then move gradually into the designated turning lane or the correct position on the right. Signalling doesn't give you priority, so wait for a safe opportunity to change lanes.

Keep your car within its lane while you wait. Don't swing left before turning right, as you could confuse drivers behind you and cross the path of a two-wheeler. Leave enough clearance from the divider to turn without scraping it, but don't straddle adjacent lanes.

If you need to stop, keep your front wheels straight until you're ready to move. Keep your foot on the brake and watch vehicles approaching from behind as well as traffic ahead.

How do you judge a safe gap for a U-turn?

Check your mirrors and briefly look directly into the relevant blind spots immediately before moving. A blind spot is an area you can't see clearly in your mirrors. The Highway Code specifically advises checking for traffic all around, including cyclists and motorcyclists, before a U-turn.

  • Check behind you and to your right for vehicles overtaking or filtering alongside.
  • Check approaching traffic in every lane your car will cross or enter.
  • Check for pedestrians crossing the opening or stepping off the divider.
  • Check for cyclists and two-wheelers near either side of your car.
  • Check the lane you'll enter for queues, parked vehicles and other obstructions.

There's no fixed safe gap for every U-turn. Your car's acceleration, the road width, visibility and the speed of approaching traffic all affect how much time you need. Choose a gap only when you can complete the whole turn without making another road user slow down or change direction.

Don't judge the gap by looking only at the nearest approaching vehicle. You may not see a motorcycle behind it, or another vehicle may be approaching faster in an adjacent lane. If you can't confidently judge the gap, wait.

How do you complete a U-turn?

Decide where your car will finish before you begin. Look towards that space as you turn, while continuing to check for people and vehicles entering your path.

  1. Make one final check. Recheck your mirrors, blind spots, approaching traffic and the space you'll enter immediately before moving.
  2. Move off slowly. In a manual car, use first gear, release the clutch gradually and press the accelerator gently. In an automatic, select Drive and use the brake and accelerator as needed to keep your speed low.
  3. Steer gradually to the right. Turn the wheel as much as the available space requires while keeping your speed low enough to steer accurately.
  4. Watch your clearance. Keep the front bumper clear of the far kerb and allow the rear wheels to clear the divider. Keep your eyes on your surroundings rather than looking down at the controls.
  5. Straighten the steering as your car lines up with the lane you're entering. Cancel the indicator if it hasn't cancelled automatically, check your mirrors and accelerate smoothly when your path is clear.

Don't press the accelerator too hard or release the clutch suddenly. Don't coast through the turn in neutral or keep the clutch pressed down throughout; keep the car in gear and under controlled power.

Can you make a U-turn at traffic signals or divider openings?

At a traffic signal, follow the signs, lane arrows and signal that apply to your turn. A green light alone doesn't mean you can make every type of turn or that your path is clear. Give way as required to pedestrians and any traffic whose path you'd cross.

At a divider opening, watch for vehicles turning from the opposite direction and traffic emerging from side roads. Don't follow the car ahead without making your own checks. Its driver may have chosen a gap that will close before you reach it.

Enter the designated lane where road markings specify one. Otherwise, finish in the appropriate lane without sweeping across several lanes. If you need to change lanes afterwards, do so separately after checking and signalling.

When should you decide not to make a U-turn?

Wait or choose another route if you can't see clearly, the exit is blocked or you're unsure about the gap. Before you start turning, you can continue to another permitted turning point or take another suitable route. Don't let a driver sounding their horn behind you pressure you into moving.

If you misjudge the space after starting, stop before you hit a kerb, divider or another vehicle. Don't reverse blindly to finish the turn. Check in every direction again and move only when you can do so safely. Before attempting tighter turns in traffic, practise judging your car's turning space with an instructor in a controlled area.

Sources