Home

What Should You Check Before Starting a Car?

Before starting a car, check your surroundings, tyres, visibility, seating position, seat belts, parking brake and selected gear. Once you start the engine, check the dashboard for warnings and make sure the road is clear before moving off.

Check around the car

Walk around the car before getting in, particularly if you've parked where people can pass close to it. Look for children, animals, low obstacles and objects near the wheels that you may not see from the driver's seat.

Check the following before you get in:

  • Look at all four tyres for obvious deflation, cuts, bulges or objects embedded in the tread.
  • Check beneath the car for fresh puddles or drips that could indicate a leak.
  • Make sure the windscreen, windows, mirrors and any camera lenses are clean enough to give you a clear view.
  • Check that the bonnet, boot and doors are properly closed.
  • Remove anything blocking your intended path, including objects immediately behind the car.

You can't confirm tyre pressure just by looking. Check it regularly with a pressure gauge against the vehicle manufacturer's recommended figures, preferably when the tyres are cold. The Highway Code vehicle maintenance guidance also recommends these checks. Don't drive on a visibly flat tyre or one with a bulge.

If you spot an unfamiliar leak, don't assume it's harmless. Clear water can come from the air-conditioning drain, but if you see an oily puddle or coloured fluid, or notice a strong fuel smell, find out the cause before you drive.

Adjust your seat and mirrors

Adjust your seat before setting the mirrors. Make sure you can press the brake pedal fully, and the clutch in a manual car, without stretching or lifting your hips off the seat. Keep a slight bend in your knees and elbows rather than locking your legs or arms straight.

Set the backrest so it supports your shoulders while you steer. Adjust the steering wheel, if possible, so you can see the instruments clearly and turn the wheel without it touching your legs. Make sure you lock the seat and steering wheel adjustments securely.

Position the head restraint so its top is approximately level with the top of your head and it sits close behind your head. If you set it too low, it won't provide the intended support.

Set the interior mirror so you can see through the rear window. Adjust the outside mirrors to show the road alongside and behind you, with only a small part of your own car visible as a reference. Mirrors leave blind spots, so you'll still need to look directly into those areas before moving.

Check seat belts and secure loose items

Fasten your seat belt with the lap section low across your hips and the diagonal section across your chest, without twists. Ask every passenger to buckle up, and secure children in a suitable child restraint according to its instructions before you start.

Keep bags, bottles and other loose items away from the pedals. Check that you've secured the driver's floor mat so it cannot slide forwards or bunch up beneath a pedal. Put heavier luggage in the boot and secure it so it can't move.

Close the doors properly and check for a door-open warning. Set your route, audio and ventilation while you're stationary, then put your phone away. Locate the indicators, lights, wipers, demister and hazard warning switch before driving an unfamiliar car.

Never run the engine in a closed garage. Vehicle exhaust contains carbon monoxide, which can build up in enclosed spaces. The Centers for Disease Control and Prevention explains the poisoning risk.

Check the gear before starting

Keep the parking brake applied while you prepare to start. Don't rely on the selected gear alone to prevent the car from moving.

In a manual car, confirm that the gear lever is in neutral. Press the clutch fully and keep your right foot on the brake before operating the starter, following the owner's manual. Some cars won't start unless you press the clutch.

In an automatic, check that the selector is in P, not D or R, and press the brake firmly before starting. Although some models also let you start in N, follow the manufacturer's starting procedure rather than experimenting with selector positions.

For a push-button start, make sure the car detects the key and press the required pedal before pressing the start button. In a hybrid or electric car, look for the ready-to-drive indicator. Don't assume the vehicle is switched off just because it's silent.

Check dashboard warnings after starting

You'll see many warning lights come on briefly when you switch on the ignition as the car checks its systems. After the engine starts, check which lights remain on and read any messages rather than dismissing them.

Check these items before selecting a driving gear:

  • Confirm that the oil-pressure warning goes out after the engine starts.
  • Check for a charging-system, engine-temperature or brake-system warning.
  • Read any tyre-pressure, steering, airbag or engine fault message.
  • Check that you have enough fuel or battery charge for your planned drive.
  • Listen for unusual knocking, grinding or other persistent unfamiliar sounds.

Don't ignore persistent warnings, especially oil-pressure or overheating alerts. Switch off safely where necessary and consult the owner's manual or a qualified mechanic. A brake warning may mean the parking brake is still on, but don't assume that explains it if the light stays on after you release the brake.

Look again before moving off

Keep your foot on the brake while selecting first gear or the required automatic driving position. Check your mirrors, look directly into the relevant blind spots and signal if it would help another road user.

Release the parking brake only when you're ready to move and can prevent the car from rolling. Look again in the direction you intend to go because someone may have entered the space since you walked around the car.

As you begin moving in a clear, safe space, check the brakes gently at very low speed. If the pedal feels unusually soft, the car pulls sharply or braking seems weak, stop safely and get the fault checked before continuing.

Sources